Posted by Walter Cohen on May 6, 2007, 3:05 pm
Never had a gas powered snow blower until now. How do I store it until I
need it next winter?
The engine takes a mixture of gas and oil.
I already ran it until the engine died for lack of fuel.
What else do I need to do (i.e. with the spark plug, etc)
Thanks.
Walter
Posted by Joseph Meehan on May 6, 2007, 4:21 pm
Walter Cohen wrote:
> Never had a gas powered snow blower until now. How do I store it
> until I need it next winter?
> The engine takes a mixture of gas and oil.
> I already ran it until the engine died for lack of fuel.
> What else do I need to do (i.e. with the spark plug, etc)
> Thanks.
> Walter
That's the big part. For me I would be sure to hose it off to get any
salt off of it and clean it up. I might spray any exposed metal with some
WS-40 and store it someplace dry and safe.
--
Joseph Meehan
Dia 's Muire duit
Posted by Don Phillipson on May 6, 2007, 6:32 pm
> Walter Cohen wrote:
> > Never had a gas powered snow blower until now. How do I store it
> > until I need it next winter?
> > The engine takes a mixture of gas and oil.
> > I already ran it until the engine died for lack of fuel.
> > What else do I need to do (i.e. with the spark plug, etc)
> That's the big part. For me I would be sure to hose it off to get any
> salt off of it and clean it up. I might spray any exposed metal with some
> WS-40 and store it someplace dry and safe.
Emptying gas tank and carburettor are primary.
I also (2) empty the oil sump;
(3) remove spark plug, squirt a few drops of oil
in the hole and pull manual starter once (to
distribute oil on cylinder walls, and replace
the spark plug only finger tight;
(4) store under cover from the weather.
--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)
Posted by Berkshire Bill on May 6, 2007, 7:57 pm
>> Walter Cohen wrote:
>> > Never had a gas powered snow blower until now. How do I store it
>> > until I need it next winter?
>> > The engine takes a mixture of gas and oil.
>> > I already ran it until the engine died for lack of fuel.
>> > What else do I need to do (i.e. with the spark plug, etc)
>>
>> That's the big part. For me I would be sure to hose it off to get
>> any
>> salt off of it and clean it up. I might spray any exposed metal with
>> some
>> WS-40 and store it someplace dry and safe.
> Emptying gas tank and carburettor are primary.
> I also (2) empty the oil sump;
> (3) remove spark plug, squirt a few drops of oil
> in the hole and pull manual starter once (to
> distribute oil on cylinder walls, and replace
> the spark plug only finger tight;
> (4) store under cover from the weather.
> --
> Don Phillipson
> Carlsbad Springs
> (Ottawa, Canada)
NO FINGER TIGHT SPARK PLUGS !! I unknowingly started a lawn mower with a
finger tight spark plug. When the spark plug left the cylinder head and
went through the side of my boot I figured "no problem" it will heal. Two
weeks later they amputated my great toe at the first joint.
Bill
Posted by Bob M. on May 6, 2007, 11:12 pm
news:463e6b88$0$4642
>>
>> Emptying gas tank and carburettor are primary.
>> I also (2) empty the oil sump;
>> (3) remove spark plug, squirt a few drops of oil
>> in the hole and pull manual starter once (to
>> distribute oil on cylinder walls, and replace
>> the spark plug only finger tight;
>> (4) store under cover from the weather.
>>
>> --
>> Don Phillipson
>> Carlsbad Springs
>> (Ottawa, Canada)
>>
>>
>>
> NO FINGER TIGHT SPARK PLUGS !! I unknowingly started a lawn mower with a
> finger tight spark plug. When the spark plug left the cylinder head and
> went through the side of my boot I figured "no problem" it will heal. Two
> weeks later they amputated my great toe at the first joint.
> Bill
...and I'd say the same to the suggestion to "drain the oil". Bad idea -
you will forget, and it will be expensive when you're reminded by the
shrieking sound of bent, busted piston & valves.
> until I need it next winter?
> The engine takes a mixture of gas and oil.
> I already ran it until the engine died for lack of fuel.
> What else do I need to do (i.e. with the spark plug, etc)
> Thanks.
> Walter